Top 10 common forklift mishaps ， forklift operation should take note of these matters ！.

Top 10 common forklift mishaps ， forklift operation should take note of these matters ！.

Blog Article

Do not underestimate the forklift at work. If the operation is not good, there will certainly be significant crashes in mins, and there are lots of crashes involving forklifts.

Situation 1: The forklift cargo obstructed the vehicle driver's sight, and the individual ahead could not be discovered, leading to a moving mishap.
Instance 2: In order to keep the balance of the forklift when lifting hefty items, the staff members used their body weight as the counterweight, which almost created casualties.
Situation 3: The width of the forklift freight exceeds the allowed size of the path and hangs on the roadside rack, which practically triggers an accident.
Case 4: Forklift is speeding up and surrender throughout a turn.
Situation 5: The forklift driver did not notice the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift raises the personnel illegally, the forklift vehicle driver does not wear the safety belt, the forklift lifter drops and the motorist is squashed when the forklift surrender.
Situation 7: The forklift vehicle driver did not wear a seat belt and dropped from the automobile when it surrendered and was squashed.
Forklift operation should take note of these issues ：.

Begin.
1. Prior to starting, observe the surroundings, and after validating that there are no challenges that hinder the safety of driving, beep the horn first and afterwards start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge have to be risk-free prior to starting.
3. When the forklift begins with a load, the motorist should initially validate that the tons is stable and reliable.
4. The begin must be slow and steady.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast needs to be tilted backward. .
2. Do not raise the fork too high when driving. When going into and leaving the work site or while driving, beware that there will be no challenges in the sky. When the tons is taking a trip, the fork needs to not be increased expensive, which will certainly affect the security of the forklift. .
3. After discharging, the fork ought to be lowered to the regular driving position prior to driving. .
4. When transforming, if there are pedestrians or automobiles nearby, the driving signal should be released initially. High-speed sharp turns are banned. High-speed doglegs will trigger the car to lose lateral security and tip over. .
5. When the forklift is downhill, it is strictly restricted to turn off the fire and slide, and it is prohibited to brake suddenly while driving with tons unless there are unique conditions.
6. When the forklift is running, it must comply with the web traffic rules in the factory and have to keep a certain safety distance from the car in front. .
7. When the forklift is running, the tons needs to remain in the lowest setting that does not hinder the driving, and the gantry ought to be correctly tilted back. The load shall not be raised except when stacking or loading. .
8. The height of the tons have to not obstruct the chauffeur's sight. In unique circumstances, when the item impacts the forward vision, drive at a reduced speed when reversing.
9. It is prohibited to activate the ramp, nor to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory location is 5 km/h, and it needs to drive securely at a reduced rate when getting in the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is restricted for workers to depend on the fork to hold things and play a stabilizing duty. .
12. If issues are found, they will be fixed and reported in a prompt manner, and they will certainly never ever operate with diseases or hide them.

packing and discharging.
1. When fork-loading items, the range between the two forks need to be changed as needed to make the lots of the two forks balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is restricted to deal with a single fork or utilize a fork top or pull. In unique situations, safety indication should be established to remind bordering pedestrians. .
3. In the process of loading and dumping products, the forklift has to be braked with the brake. .
4. The rate of the car should be sluggish and steady. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and harm people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as possible under the lots, and it ought to be kept in mind that the fork tip must not touch other products or things. The load must be stabilized with very little back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted onward slightly when the tons is decreased to allow for simple positioning of Stand-on Electric Pallet Stacker the lots and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with difficult things with the fork head. .
7. When the forklift is functioning, it is forbidden for individuals to loaf the fork, so regarding avoid the collapse of the goods and hurt people. .
8. Straining is prohibited, and it is Electric Forklift Truck for Warehouse restricted to utilize forks to raise employees to engage in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slide, place, round or roll objects. .
10. It is not allowed to utilize forks to choose, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you must unload the goods or lower the fork structure.
2. Draw the hand brake take care of to dead or dispirit the parking brake button.
3. The engine is turned off and the power is removed. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not go beyond 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance should be checked, and gas, lubing oil and air conditioning water must be added.
2. Check the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are regular.
5. After the forklift is running, the outside leakage should additionally be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the automobile;.
2. When you experience someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning need to not be as well sharp to prevent the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and consistent, and no switching on the slope is enabled.
7. Do not drive across the slope. When the slope is above 10%, the vehicle must be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into large or hefty goods and most likely to the driver's line of vision, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping force to exile round or easy-to-roll things.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Car parking is not permitted under the list below problems.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the road, the opposite side of the section with the exact same size as the barrier need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844